MPS-3033XP Series

Tri-channel programmable DC power supply


◆ Three channels show and adjust current and voltage at the same time 

◆ Intelligent temperature controlled fun to reduce the noise
◆ Serial/Parallel/Track mode
◆ With SENSE function
◆ 40 groups of storage

Precision Impedance Analyzer


Signal source frequency range: DC, 10Hz~5/10/20/30MHz

 Basic impedance measuring acuracy: ±0.05%

◆ Source position: variable voltage 10mV~2V/Variable current 200uA~20mA

◆Output impedance 25Ω/100Ω, switchable

◆ CC,CV,CR,CP,short circuit,dunamic and other working modes
◆ OVP,OCP,OPP,OHP,multiple protection functions
◆ Accuracy of 0.1%
◆Automatic test function setting
◆ RS-232 interface

PEL-8000 Series

Electronic load

◆Voltage 1mV, Current 0.1mA resolution

◆9 groups storage function

◆Linear power supply, low ripple and noise

◆Over limit alarming function

◆ RS-232 interface

MPS-3600H Series

High precision DC Power supply


Storage AC Power Source
  • The advanced direcct digital frequency synthesizer(DDS) waveform is used to achive high frequency stability, good continuty and accurate measurement
  • Keyboard shortcuts; 110V, 220V, 50Hz, 60Hz shortcuts self-assembly
  • Key LOCK function prevents inadvertent touch
  • With key lock M1, M2, M3, M4 and M5 five sets of memory can store the commonly used voltage V and frequency F, easy to recall them by one key
  • Push-down infinite coding knob switch, adjusting cursor position by pressing the knob
  • Four window five digit display, display voltage V, frequency F, current I, power P, power factor PF simultaneously, and more accurate.
  • Measuring function: voltage, current, frequency, power, power factor
  • Strong overload capacity, 300%overload 2s
  • Intelligent analyzing function: automatically judge the cause of failure and situation, as well as display the code when alarming is reported
  • Equipped with 100% load and unload function, the voltage stabilizingreaction time is within 20ms
  • Output voltage 0-150.00V, 0-300.00V
  • Input frequency 45.00-250.00Hz
  • Input and output are isolated
  • Has soft start function to avoid the damage to power supply caused by the instantaneous impulse current of the load(such as motor) when power on


model APS-4000A APS-4000B APS-4000C
capacity 350VA 700VA 1200VA
Operating mode SPWM (Sinusoidal Pulse Width Modulation)
Phase 1φ2W
Voltage 220V ± 10%
frequency 45-250Hz (0.01step)
Phase 1Φ2W
Voltage 0 ~ 150VAC / 0 ~ 300VAC AUTO
frequency 45 ~ 250Hz (0.01step)
Maximum current L = 120V 3A 6A 10A
H = 240V 1.5A 3A 5A
Load regulation 1%
Waveform distortion 2% (low-end 120V, high-end 240V, with pure resistance load)
Frequency stability 0.01%
display Voltage / current / frequency / power / power factor
Voltage resolution 0.01V
Frequency resolution 0.01Hz
Current resolution 0.001A
storage M1 ~ M5 (V_F_A)
Test accuracy Voltage ± 0.5% FS + 5dgt
Electric current ± 0.5% FS + 5dgt
frequency ± 0.01% FS + 5dgt
power ± 0.5% FS + 5dgt
Setting accuracy Voltage ± 1% FS
frequency ± 0.1% FS
Current limit setting 0 ~ Max Current (The maximum current is: maximum capacity / 240V or P / 240)
Output protection Overcurrent, overtemperature, overload, short circuit
Operating environment 0 ~ 40 ° C ≤80% RH
Bare metal size mm 365 * 150 * 430 365 * 150 * 430 365 * 150 * 430
Packing size mm 510 * 255 * 550 510 * 255 * 550 510 * 255 * 550
net weight kg 12.7 15 18.5
Gross weight kg 14.5 16.7 20
MATRIX TECHNOLOGY INC.    Power Supply    AC Power Source    APS-4000A/APS-4000B/APS-4000C