MPS-3033XP Series

Tri-channel programmable DC power supply


◆ Three channels show and adjust current and voltage at the same time 

◆ Intelligent temperature controlled fun to reduce the noise
◆ Serial/Parallel/Track mode
◆ With SENSE function
◆ 40 groups of storage

Precision Impedance Analyzer


Signal source frequency range: DC, 10Hz~5/10/20/30MHz

 Basic impedance measuring acuracy: ±0.05%

◆ Source position: variable voltage 10mV~2V/Variable current 200uA~20mA

◆Output impedance 25Ω/100Ω, switchable

◆ CC,CV,CR,CP,short circuit,dunamic and other working modes
◆ OVP,OCP,OPP,OHP,multiple protection functions
◆ Accuracy of 0.1%
◆Automatic test function setting
◆ RS-232 interface

PEL-8000 Series

Electronic load

◆Voltage 1mV, Current 0.1mA resolution

◆9 groups storage function

◆Linear power supply, low ripple and noise

◆Over limit alarming function

◆ RS-232 interface

MPS-3600H Series

High precision DC Power supply


High Precision Power Meter
MPM series intelligent electrical parameter measuring instrument is a set voltage test, current test, power test. Multi-functional measuring instrument with integrated power factor and high-speed processor inside.


Six test parameters V, A, P, PF / F / Apk
Power factor, current, power upper and lower limit settings, sound and light alarm
Wider frequency response 15Hz-650Hz, surpassing all products of the same level
Can test no-load power consumption, minimum current 0.2mA, minimum power 0.001W


model MPM-1010 MPM-1010B
Four window display V, A, P, Apk / PF / F
Input voltage 1V ~ 300V
Input Current 0.2mA ~ 3000mA
Power range 0.01W ~ 900W 0.001 ~ 900W
Accuracy ± (0.4% reading + 0.1% range)
Range switching automatic
Power factor 0-1
Frequency range AC: 15Hz ~ 650Hz
communication method RS232
Upper and lower limit settings V, A, P, PF
Local electricity 110V / 220V switchable
Audible alarm
Key lock
Bare metal size (W * H * D) mm 225 * 100 * 305 220 * 105 * 360
Packing size (W * H * D) mm 300 * 210 * 420 300 * 210 * 480
Net weight kg 2.5 2.5
Gross weight kg 3.3 3.6