MPS-3033XP Series

Tri-channel programmable DC power supply


◆ Three channels show and adjust current and voltage at the same time 

◆ Intelligent temperature controlled fun to reduce the noise
◆ Serial/Parallel/Track mode
◆ With SENSE function
◆ 40 groups of storage

Precision Impedance Analyzer


Signal source frequency range: DC, 10Hz~5/10/20/30MHz

 Basic impedance measuring acuracy: ±0.05%

◆ Source position: variable voltage 10mV~2V/Variable current 200uA~20mA

◆Output impedance 25Ω/100Ω, switchable

◆ CC,CV,CR,CP,short circuit,dunamic and other working modes
◆ OVP,OCP,OPP,OHP,multiple protection functions
◆ Accuracy of 0.1%
◆Automatic test function setting
◆ RS-232 interface

PEL-8000 Series

Electronic load

◆Voltage 1mV, Current 0.1mA resolution

◆9 groups storage function

◆Linear power supply, low ripple and noise

◆Over limit alarming function

◆ RS-232 interface

MPS-3600H Series

High precision DC Power supply


High Frequency LCR Meter

The MCR-9000 series  precision LCR meter provide six frequency options (10 Hz to 1/3/5/10/20/30MHz), it is suitable for the LCR testes of AC signals. The measurement in a continuously changing environment can be executed stage-by-stage with the test frequency and grade, and high-speed continuous tests can be performed under different test and mode conditions. 



 Test Frequency  MCR-9005 10Hz ~ 5MHz
MCR-9010 10Hz ~ 10MHz
MCR-9020 10Hz ~ 20MHz
MCR-9030 10Hz ~ 30MHz
Minimum Resolution 100mHz, 6-bit Frequency Input
Accuracy 7 ppm±100mHz
Basic Accuracy ± 0.05% 
AC Measurement      Test Signal Voltage Level  10mV - 2Vrms
Voltage Minimum Resolution 1mV
Accuracy ALC ON:6% * Voltage ± 2mV
ALC OFF:10% * Voltage ± 2mV
Test Signal Current Level 200µA - 20mArms
Current Minimum Resolution 10µA
Accuracy ALC ON:6% * Current ± 20µA
ALC OFF:10% * Current ± 20µA
DC Measurement      1V (fixed)
Test Time  (The fastest) < 3ms
Output Impedance 25Ω/100Ω, switchable (Nominal value)
Parameters |Z|、|Y|、θ、X、R、G、B、L、D、Q、DCR、C、 Vdc-Idc、ESR、ε' ε"and μr' μr"
Measurement Mode Meter mode, list mode
Measurement Circuit  Series/Parallel
Correction Open Circuit/ Short Circuit/Load correction
List mode 50 groups of Multi-steps setting (Each group contains up to 15 steps)
Comparator  ABS、ΔABS、Δ%、OFF
Bulit-in Storge 100 sets LCR Meter setting documents, 50 sets list mode setting documents
USB Host Storge LCR setting documents, list mode setting documents, BMP graphics
Interface RS-232、GPIB、Handler、LAN、USB Host/Device
Power Supply  Voltage 90V ~ 264Vac
Frequency 47Hz ~ 63Hz
Power Consumption Low power consumption: Maximum 30W (Nominal value)
Display 7.0”TFT, 800x480 color screen
Environment Temperature: 10℃ ~ 40℃   Humidity: ≦80%
Dimension (W*H*D) 336x147x340 mm
Weight  3 kg



Parameters Measurement Ranges
|Z| 0.000 mΩ - 9999.99 MΩ
R, X ± 0.000 mΩ - 9999.99 MΩ
|Y| 0.00000 uS - 999.999 kS
G, B ± 0.00000 uS - 999.999 kS
θRAD ± 0.00000 - 3.14159
θDEG ± 0.000° - 180.000°
Cs, Cp ± 0.00000 pF - 9999.99 F
Ls, Lp ± 0.00 nH - 9999.99 kH
D 0.00000 - 9999.99
Q 0.00 - 9999.99
Δ ± 0.00% - 9999.99%
Rdc 0.00 mΩ - 99.9999 MΩ
εr' εr'' 0 - 100000
μr' μr'"  0 - 100000